Huawei Mate 50 Pro DCO-AL00 Test Point (EDL Point) Reboot to EDL Mode 9008
Learn how to locate the Huawei Mate 50 Pro DCO-AL00 test point to remove pattern locks, bypass FRP, and flash stock ROMs. Use this method for dead boot repair, flashing firmware, and installing custom ROMs without unlocking the bootloader. Follow step-by-step instructions for advanced mobile repair
Huawei Mate 50 Pro DCO-AL00 Test Point Image
How To Connect Huawei Mate 50 Pro DCO-AL00 EDL Mode
- Disassemble your Huawei Mate 50 Pro DCO-AL00 to access the motherboard.
- Locate the Test Point on the motherboard.
- Use a tweezer to short the Test Pinout and connect the USB cable simultaneously.
- Ensure the device enters EDL (Emergency Download) mode.
- Open Device Manager on your computer and navigate to Port.
- Confirm if “Qualcomm HS-USB QDLoader 9008 (COM__)” is displayed.
- If there are issues, update your drivers to resolve them.
